plus Airport Runway Repairs

plus BluCem HE80AG

plus Bolt Grouting

plus Concrete Protection

plus Concrete Repair

plus Crack Injection

plus Epoxy Coatings

plus Ground Support

minus Grouting

plus High Early Strength Grouting

plus HV Cable Grouting

plus Settlement Prevention

plus Sewer Repair

plus Soft Eye Reinforcement

plus Soil and Rock Grouting

plus Strata Support

plus Structural Repairs

plus Tunnel Support

plus Underwater Grouting

plus Wharf Repairs


Bluey Technologies Pty Ltd is a leading supplier of industry-standard products across the civil engineering sector. Playing a major role in projects across Australia, New Zealand and beyond, we have been involved in various civil engineering projects, including tunnels, roads construction, railways, ports and basements among others.

Due to the inherent complex nature of civil engineering projects, our services also extend to on-site technical support. This means that whatever the application and Bluey product in use, we can provide expert implementation assistance.

Bluey Technologies is committed to safety, health and the environment, with our consultants focused on offering innovative, safe and environmentally-friendly approaches to civil engineering.

One of our core areas of expertise is grouting. Read on below to find out what this subject includes and how Bluey can assist your next grouting assignment.

What is grout?

The first important point around grout is that it is neither mortar nor concrete – its state is somewhere in between. While it still contains the same ingredients of cement, water and sand, grout is more fluid than mortar and concrete, which makes it ideal in certain civil engineering applications.

Grout’s fluidity and plasticity is essential as it is placed in voids and in tight spaces where stability is key. This is because grout is expected to not only fill the space, but also connect to the surface and any associated joints.

In contrast to other structural paste products such as plaster, cement grout can produce an excellent durability and low permeability. At Bluey Technologies, we aim to ensure that all grouts are correctly mixed and applied to ensure the best outcome for the project.

How to select the right grout

Bluey Technologies has a wide range of grout products as part of the popular BluCem range. With so many leading offerings in stock, we aim to match the right grout based on your project’s application.

During initial investigations and discussions, we will establish project expectations and what outcomes are required for the stakeholder. Using this information, we can determine which grout product will add the most value.

Of course, our on-site assistance team can assess its success and ensure the project runs to budget and on time.

Where are our grout products used?

We’ve had outstanding success with our various grout products in recent years. As well as developing for specific offering for projects, we have also extended our range to serve wider sections of the Australasian civil engineering community. This includes:

  • Pile Grouting (HS200)
  • Airport Runway Repairs (HE80 and HE80AG)
  • Embankment Stabilisation (CSW, HS200)
  • HV Cable Grouting (LH60)
  • Soil and Rock Grouting (HS200, HS400)
  • Post tension Grouting (HS200)
  • Bolt Grouting (HS200, HS400)
  • Underwater Grouting (HS60 UW)

Regardless of your grouting requirements, the team at Bluey has the expertise and products to make sure the project meets yours and our high expectations. In fact, you only have to investigate our success with large-scale, high-performance grouting to see how we can add value.

In recent years, we’ve supplied grout to the Eastlink Project Melbourne (3,500m3), the Hay Point Coal Wharf (2,500m3), Melbourne Airport (1,600m3), Airport Link Brisbane (1,500m3) and the Victorian Desalination Plant (1,200m3).

Our grout products are industry-proven and tested in the toughest of conditions. This means you can trust that our grouts are built to last and perform to the highest standard.

With a reliability of supply and training and on-site product support available, why use any other business for your project grouting requirements?

For more information on how Bluey can assist your grouting applications, contact our team today.


BluCem EA55 Low Thermal Cementitious Grout



BluCem HS100 & HS400



BluCem HS100A



BluCem HS200, GP60 & 50/10


Statement of Responsibility    Privacy & Terms

© 2020 Bluey Technologies Pty Ltd. The Bluey name, associated trade marks and logos and the "Bluey” logo are trade marks of Bluey Technologies Pty Ltd.