CEMENTITIOUS GENERAL PURPOSE NON-SHRINK CONSTRUCTION GROUT
Masterflow 700 is a ready-to-use pumpable, natural aggregate, general purpose grout which undergoes controlled expansion in the plastic state. Masterflow 700 may be placed in dry (damp) packed, plastic or fluid consistency and is generally used in applications requiring a grout thickness between 10mm and 100mm.
All general purpose grouting operations with clearances of 10mm to 100mm including:
Non-critical column and equipment bases
An in-fill grout for cavity block walls
In caulking of joints and pipes
Between and under pre-cast panels and other joints where total load bearing is not required
Underpinning where a grout similar in appearance to concrete is required
MasterFlow 700 is ideal for grouting operations with clearances of 10mm to 100mm. It is a ready to use premixed grout requires only the addition of mixing water on site.
Low water/cement ratio – reduces drying shrinkage and increases durability
Damp packable – can be applied without slumping
Complete void filling – resulting from a controlled fluid-phase expansion
Non staining grout – similar in appearance to plain concrete
Economical – relatively low in-place cost due to its ease of use and flowable properties
No added chlorides – does not contribute to chloride load