Wynyard Walk will be an exceptional piece of infrastructure.

Wynyard Walk – the role of Bluey Technologies

Bluey played a key role in waterproofing the tunnel for the Wynyard Walk project, a major civil engineering project in the heart of Sydney. Read on to learn more about the process.

Wynyard Walk project details

The project, which includes a pedestrian tunnel, entry building, and bridge will allow people to travel from the Wynyard transport hub in Sydney's CBD to the Barangaroo waterfront in approximately six minutes, avoiding steep inclines and crossings.

Bluey Technologies commenced work to waterproof the 110 metre long, nine metre wide tunnel from April 2015.

The industry leader in civil engineering also provided ultra-rapid set grouts used for packing and standing steel sets used for tunnel support and rock bolts.

Bluey's engineering support

Bluey, an industry leader in tunnel waterproofing, assisted the project in a number of areas, including:

  • Generation of appropriate tunnel waterproofing specifications
  • Generation of waterproofing design details, particularly around interface areas
  • Development and approval of a safety system to protect workers between the operator controls and any overhead obstruction
  • Investigation of alternative waterproofing methods for "shrinking" the thickness of the primary and secondary lining thickness in an area of lower than expected clearance to  fibre optic ducts
  • Planning short ground support cycle time through the use of BluCem HE80
  • Approval of a double VLPDE system – this was used instead of a geofab/VLDPE system in two areas of the tunnel which improved performance by providing a stiffer waterproofing layer in the shoulders.

With Bluey's wide range of products, the on-site engineering team carefully reviewed each product to determine the best solution for the tunnel environment.

The BluSeal Anchor Knob Sheet (AKS) advantage

Bluey's expert team of engineers suggested the cast-in high density polyethylene membrane (the capable BluSeal AKS) as it allowed the project team to access the waterproofing layer in the event of a leak.

Water is a constant issue within the tunnelling environment and any issues need to be fixed immediately. The BluSeal AKS can be visually tested post-installation, a contrast to the traditional sandwich waterproofing techniques.

Consumers always have questions about the stability of products and Bluey's team ensured maximum stability.   

BluSeal AKS – exceeding standards and expectations

Due to the complexity of the tunnel and its 100 year design life, the product needed to meet BCA requirements for the Spread-of-Flame Index, the Smoke-Developed Index or the Flammability Index. 

The project team supplied BluSeal AKS samples to the Commonwealth Scientific and Industrial Research Organisation (CSIRO). The solution passed with flying colours and the team were more than happy to take advantage of its benefits.

The tunnel has a deluge system and not subjected to high fire loads which made AKS an excellent choice in this environment.

Wynyard Walk opening

When the infrastructure is open to the public later this year, pay particular attention to the high quality finishing details.

Bluey is the waterproofing sheet membrane supply and install contractor of choice for tunnel work in Australia.

To learn more about Bluey's history and wide range of products, feel free to contact our friendly team today.

Share

Statement of Responsibility    Privacy & Terms

© 2017 Bluey Technologies Pty Ltd. The Bluey name, associated trade marks and logos and the "Bluey” logo are trade marks of Bluey Technologies Pty Ltd.